IS Code For PPE/ Personal Protective Equipment’s Indian Standards/ Indian Standard for Personal Protective Equipment's



1 ISI certified full-face crash bike helmet IS 4151 

2 Safety Helmet IS 2925 

3 Fluorescent jacket IS15809  

4 Electrical hand gloves IS 4770 

5 Safety goggles with side shields IS 5983 

6 Cotton gloves IS 6994; Part-1 

7 Full body safety harness with double lanyard, with energy absorber, IS 3521/EN 361 & EN 358 (Energy Absorber) 

8 Work position lanyard IS 3521 / EN 358 

9 Anchorage sling IS 2266 

10 Karabiner EN 12275 

11 Pulley IS 8531 Kernmantle rope/polyamide/polypropylene rope IS 9936 

12 Rubber gloves IS 4770 

13 Dust mask, Face mask (respirators) IS 9473

Comments

Post a Comment

Popular posts from this blog

MONSOON ACTION PLAN FOR CONSTRUCTION SITE

  Objective: Monsoon is a major weather phenomenon and substantially impacts construction activities. This monsoon plan aims to identify the hazards and risks associated with monsoon at various stages of construction at the project site and to place adequate control measures to mitigate the risks and prevent accidents during the work, activities thereby facilitating the smooth progression of work. Potential Hazards during monsoon: Some of the potential hazards are Flooding and water accumulation at the site, immersion of materials, landslide, toppling of vehicles, electrocution, fall of man &material due to slippery nature of the site, lightning and thunderstorm attack, contamination of soil due to oil & fuel spill, accumulation of food and other waste, spreading of communicable diseases, mud spill on public roads while transporting the materials which may pose a hazard to motorists and pedestrians due to its slippery nature, local traffic congestion, accidents during trans...
Read more

Hot Work Safety Precautions

 Hot Work:-  Means any activity that generates heat, flame, and/or sparks that could potentially cause a fire incident. Such may include welding, grinding, gas-cutting, pipe brazing, etc. Welding & Gas Cutting:- A.  Welding and gas cutting operations should be done only by qualified and authorized persons and as per IS Specifications and Code of Practice. B.    Welding and gas cutting should not be carried out in places where flammable or combustible materials are kept and where there is danger of explosion due to presence of gaseous mixtures. C. Welding and gas cutting equipment including hoses and cables shall be maintained in good condition. D    Barriers shall be erected to protect other persons from harmful rays from the work. When welding or gas cutting is done in elevated positions, precautions shall be taken to prevent sparks or hot metal falling on persons or flammable materials. E    Suitable type of protective clothing consis...
Read more

General Guideline for Manual and Mechanical Material Handling | Manual Material Handling/Mechanical Handling |

Image
  Guideline for Manual and mechanical material handling:- Manual materials handling  involves the handling, moving, lifting, and carrying of materials without the use of mechanical  equipment. Minimizing injuries that occur from materials handling requires planning about  these tasks. Following points must be taken into consideration while doing the manual and  mechanical material handling work. 1.  Ensure that the workers engaged for manual material handling operation must be trained for  manual material handling techniques and should be carried out under experienced  supervision. 2.  Ensure that the lifting, carrying or moving of material, articles or things does not endanger  the safety of nearby and other workers. 3.  Before lifting or shifting, size up the load first. If it is too big in size, ask for help of others. 4.  Take a round, inspect and look of work / nearest area before lifting and check whether it is  sli...
Read more